Water Saving Tap Inserts Twin Pack - with Special Fitting Tool

WRAS Approved.

The details and benefits of these tap inserts:

  • Water efficient – With a flow rate of 5 litres per minute, compared to a standard 10 litre per minute flow rate
  • Fully aerated – Limiting splashing, reduces velocity of stream and contains anti limescale materials approved to BS6920
  • Easy to fit – Special tool is provided and uses the original housing to retain the design and aesthetics of tap

product id: 744

Choose your Multi Buy Multibuy discounts available +
£6.99 Now£4.99 P&P: £2.00

Designed to regulate the flow rate on two taps around the home to 5 litres per minute, helping you to reduce your water usage. The tap inserts are suitable for taps with unscrewable tops which usually feature two straight edges.

These water efficient tap inserts comes with:

    • 4 adaptor rings (2 x black & 2 x grey)
    • 2 x 5 litre per minute aerator with Intelligent Flow Control


Fitting Instructions:

      • Slide the opening of the blue tool around the end of the tap. There are various size fittings so make sure the tool fits snugly
      • Twist anticlockwise until the end of the tap comes away from the spout
      • Remove the original insert from the housing
      • From the components, select one to replace the old insert, as follows (you’ll find only one component will fit):
      • The grey ring is for housings that have an internal shoulder at the outlet of the housing
      • The black ring is for housings that have no visible shoulder
      • For small housings (JR size) just insert the aerator
      • Install the converter ring into the tap housing and using original gasket replace on to spout hand tight. If using the grey or black converter ring, insert the aerator fully into the ring until the top of the aerator is flush with the top of the ring


*The tap insert requires the tap end to have two straight edges. It will fit the majority of taps with a screwed outlet housing. It is not suitable for large bath taps. The inserts should not affect the performance of your taps, merely regulate the flow to 5 litres per minute.

What people are saying

Mr John Stevens

Unfortunately we were unable to fit the device to the tap. We had a previous tap aerator which was ok, but none of the attachments seemed to suit this one.

Mrs Suzanne Lucas

worked really well about the only one that has out of three purchases Thank you very much


This little tool can save a lot on the utility bill & I really wanted to fit this in our kitchen sink but unfortunately it doesn't suits the type of tap we have, will give it away for someone who can use it.

C Brookes

Easy to fit and does what it says in the advert. Really impressed

M Leung

Great product which works. The water now flows at a lower rate in my kitchen sink thus wasting less water. Takes longer to fill up a kettle but saves so much water when I am doing everyday washing in my sink. The blue device helps to unscrew the original from the sink is a godsend.....shame I can only use one as my bathroom sink tap does not fit it.

Since 2007, we’ve used our unrivalled expertise to acquire and engage almost 1,000,000 customers, distribute more than 2.75 million devices and save Britain over 51 billion litres of water.


Through a combination of Insight, Innovation and Integrity, Save Water Save Money is the UK’s largest provider of water saving products and services, leading the way in water efficiency.

Carefully selected products

Ours isn’t an ordinary bathroom range. Each stylish piece is hand-selected by experienced experts to be water-efficient, cost-effective, attractive or all three.

We will help you save

Whether you’re on a water meter or not, our products can save you money on your utility bills by using less energy to heat the water you use.